Motorola manual Installation, Setting Up simplefi, Section

SECTION 3 INSTALLATION

Follow the step-by-step installation procedure in this section to ensure you set up your simplefi, install the wireless adapter, wireless adapter software, and SimpleWare software correctly. You should be able to complete the installation procedure in less than 15 minutes. This section contains the following topics.

•Setting up simplefi

•Installing SimpleWare software

•Installing the wireless network

•Discovering your simplefi

•Activating your Online Guide

Setting Up simplefi

Plug your simplefi into your home stereo:

1Place simplefi near or on top of your stereo receiver and plug in the AC adapter.

2Plug one end of the audio signal cable into the RCA jacks on the back of simplefi. Plug the other end of the audio cable into the corresponding left and right RCA jacks on your stereo receiver.

Use either the CD inputs or the auxiliary inputs (or other inputs if these are already in use).

Reset switch AC adapter

Figure 3 -1

Connecting simplefi

to your stereo

RCA jacks Audio signal cable

SECTION 3, INSTALLATION 7