ATEN Technology KM0832 user manual F3 SET, continues on next page, Setting, Function

Chapter 4. OSD Operation

F3: SET

This function allows the user to change the account password and set up a unique working environment. A separate profile for each user is stored by the OSD and is activated according to the username that is provided during login. The settings are explained in the following table:

Setting	Function
CHANGE	Enables the user to change the account password.
PASSWORD	Enter the old account password in the top field. Enter a new password
	in the middle field, and then reenter the password in the bottom field to
	confirm it. Press enter to save changes and return to the previous
	menu.
OSD	Selects which Hotkey activates the OSD function:
ACTIVATION	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs running on
	the computers, the default is the Scroll Lock combination.
SET	If there is no input from the console for the amount of time set with this
LOGOUT	function, the operator is automatically logged out. A login is necessary
TIMEOUT	before the console can be used again.
	This enables other operators to gain access to the computers when the
	original operator is no longer accessing them, but has forgotten to log
	out. To set the timeout value, key in a number from 1–180 minutes,
	then press [Enter]. If the number is 0 [zero], this function is disabled.
	The default is 0 (disabled).
SCREEN	If there is no input from the console for the amount of time set with this
BLANKER	function, the screen is blanked. Key in a value from 1–30 minutes, then
	press [Enter]. A setting of 0 disables this function. The default is 0
	(disabled).
HOTKEY	Enables / Disables the Hotkey Command function in case a conflict
COMMAND	with programs running on the computers occurs. The default is
MODE	enabled. Choices are Y (Yes), or N (No).
	(continues on next page)

85