ATEN Technology KM0832 user manual Restoring Original Factory Default Settings

KM0832 User Manual

Restoring Original Factory Default Settings

You can restore the original factory default settings for the KM0832 Matrix KVM Switch. The original password for the default super administrator account is restored; all super administrator, administrator, user, and group accounts are removed from the system. Only the station name, Webpage Session Timeout setting, network settings, and date and time are retained. This procedure requires the use of a jumper cap.

1.Turn off the KM0832 and unplug the power cord.

2.Remove the cover of the KM0832.

3.Place a jumper cap over pins 1-2 of the J3 jumper on the mainboard.

J3J8

4.Plug in the power cord and turn on the KM0832. The following directions appear on the console screen:

USERNAME AND PASSWORD INFORMATION AND PORT/USER INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN RESTART.

5. Turn off the KM0832 and unplug the power cord.

112