ATEN Technology KM0832 user manual IP Address, Port Settings

Chapter 3. Administrator Utility

IP Address

The KM0832 has the option to either manually enter a static IP address or use a DHCP server on your network to dynamically assign one. If you enable a DHCP server to assign an IP address to the KM0832, you can enable the KM0832 to send an e-mail notification when the IP address changes. See System Event Reports, page 40.

To use a DHCP server to assign an IP address, click Yes under DHCP enabled.

To manually assign an IP address:

1.Under DHCP enabled, click No.

2.In the fields under Manual IP address, enter the IP address, subnet mask, default gateway, and primary DNS server. You also can enter an alternate DNS server; however, it is not required.

Port Settings

Enter the network ports that the KM0832 will use to transfer Webpages and communicate with client programs. Typically, port 80 is used for Hyper Text Transfer Protocol (HTTP) communications, while port 443 is used for HTTPS (HTTP over Secure Socket Layer). Failure to assign a port number for each field will cause the KM0832 Administrator Utility to function incorrectly.

39