ATEN Technology KM0832 user manual Hotkey Beeper Control, Hotkey Summary Table

Chapter 5. Hotkey Operation

Hotkey Beeper Control

The beeper (see SET BEEPER, p. 86) can be toggled on and off by means of a Hotkey. To toggle the beeper, enter the following Hotkey combination:

1.Invoke HKM (see p. 99).

2.Press [B]

After you press B, the beeper toggles on or off. The command line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit HKM.

Hotkey Summary Table

[Num Lock] + [ * ]	[port ID] [Enter]	Switches access to the computer that
or		corresponds to that port ID.
[Num Lock] + [ - ]	[T] [n] [Enter]	Sets the Auto Scan interval to n
		seconds—where n is a number from 1–
		255.
	[A]	Invokes Auto Scan Mode.
		When Auto Scan Mode is in effect, [P] or
		left-click pauses Auto Scanning.
		When Auto Scanning is paused, pressing
		any key or another left-click resumes Auto
		Scanning.
	[←]	Skips from the current port to the first
		accessible port previous to it.
	[→]	Skips from the current port to the next
		accessible port.
	[B]	Toggles the beeper on or off.

103