
KM0832 User Manual
(continued from previous page)
Setting | Function |
|
|
SET PORT ID | A submenu appears with three selections: |
| ID |
| on the monitor. The default is the upper left corner, but you can |
| have it appear anywhere on the screen. |
| Use the mouse or the arrow keys plus [Page Up], [Page Down], |
| [Home], [End], and [5] (on the numeric keypad with [Num Lock] |
| off), to position the port ID display, then |
| [Enter] to lock the position and return to the View submenu. |
| DISPLAY |
| on the monitor after a port change has taken place. The choices |
| are: |
| USER |
| (from |
| ALWAYS |
| select User Defined, key in the number of seconds, then |
| press [Enter]. The default is 3 seconds. A setting of 0 (zero) |
| disables this function. |
| DISPLAY |
| number plus the port name (PORT NUMBER + PC NAME); the |
| port number alone (PORT NUMBER); or the port name alone |
| (PC NAME). The default is PORT NUMBER + PC NAME. |
|
|
SET SCAN | SCAN |
| each port as it cycles through the selected ports in Auto Scan |
| Mode (see F7 SCAN, p. 97). Key in a value from |
| then press [Enter]. The default is 5 seconds; a setting of 0 |
| disables the Scan function. |
| SCAN |
| Auto Scan Mode (see F7 SCAN, p. 97). Choices are: |
| |
| personal. See SET PERSONAL VIEW on p. 83. |
| |
| access. See PORT ACCESS, p. 90. |
| ACCESSIBLE + |
| permitted to access and that have their attached computers |
| powered on. |
| The default is Accessible + Powered. |
|
|
84