ATEN Technology KM0832 System Reset Button, User Port 1 Switch, User Port 1 Maintenance Port

Chapter 1. Introduction

4.SYSTEM RESET Button

ŠPressing and holding in this switch for more than three seconds performs a system reset.

Note: This switch is semi-recessed and must be pushed with a thin object—such as the end of a paper clip or a ballpoint pen.

5.USER PORT 1 Switch

This switch selects which USER PORT 1 is active—the one on the front panel or the rear panel. Set it to FRONT to activate USER PORT 1 on the front panel; set it to REAR to activate USER PORT 1 on the rear panel.

6.USER PORT 1 (Maintenance Port)

This port is provided for convenient and easy access for system maintenance. It shares the same function with USER PORT 1 on the rear panel. By switching the USER PORT 1 switch to FRONT, USER PORT 1 on the rear panel is deactivated and USER PORT 1 on the front panel is activated. Use it just as you would any other user port. (You must return the USER PORT 1 switch to the REAR position to reactivate USER PORT 1 on the rear panel.)

7