ATEN Technology user manual KM0832 Rear View, Power Socket, POWER Switch, CONFIGURATION Port

KM0832 User Manual

KM0832 Rear View

1 2 3 4

5 6 7

1.Power Socket

The power cord to the AC source plugs in here.

2.POWER Switch

This is a standard rocker switch that powers the station on and off.

3.CONFIGURATION Port

The KM0832 is connected to the local network via the CONFIGURATION port. It provides access to the KM0832 Administrator Utility to configure the switch, create and manage user and group accounts, set device access permissions, upgrade firmware, etc.

4.F/W UPGRADE Switch

During normal operation and while performing a firmware upgrade, the firmware upgrade recovery switch should be in the NORMAL position. See p. 67 for firmware upgrade recovery details.

5.CHAIN OUT Port

When daisy chaining stations (see p. 23), the CHAIN OUT port is used to connect the lower stations in the chain.

Note: If this feature is not operative on your unit, you will need a newer version of the firmware. Contact your dealer for details.

8