ATEN Technology KM0832 user manual Setting, Function

Chapter 3. Administrator Utility

Setting	Function
Change	Enter the old account password. Enter a new password, and then
Password	reenter the password to confirm it. Or, do not enter anything to
	leave the password unchanged.
OSD Activation	Selects which Hotkey activates the OSD function:
	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs running
	on the computers, the default is the Scroll Lock combination.
Set Logout	This function allows you to specify the number of minutes to elapse
Timeout	before an inactive user is timed out of the OSD. If there is no input
	from the user for the specified amount of time, the user will be
	logged out automatically.
Screen Blanker	If there is no input from the console for the amount of time set with
	this function, the screen is blanked. Key in a value from 1–30
	minutes, then press [Enter]. A setting of 0 disables this function.
	The default is 0 (disabled).
Hotkey	Enables / Disables the Hotkey Command function in case a
Command	conflict with programs running on the computers occurs. The
	default is enabled.
Set Beeper	When set to ON, the beeper sounds whenever the port is switched,
	when activating the Auto Scan function (see page 97), or when an
	invalid entry is made on an OSD menu. The default is ON.
Set Idle Timeout	If there is no input from the console accessing a particular port for
	the amount of time set with this function, the port is released,
	allowing it to be accessed by the other consoles.
	To set the timeout value, key in a number from 0–255 seconds,
	then press [Enter].
	If the number is 0 [zero], this function is disabled. The default is 5
	seconds.

63