ATEN Technology KM0832 user manual SET Beeper, Idle Timeout, Restore User, Default

KM0832 User Manual

(continued from previous page)

Setting	Function
SET BEEPER	When activated, the beeper sounds whenever a port is changed,
	when activating the Auto Scan function (see F7 SCAN, p. 97), or
	an invalid entry is made on an OSD menu. The default is Y
	(activated). Choices are Y (Yes), or N (No).
IDLE TIMEOUT	If there is no input from the console accessing a particular port
	for the amount of time set with this function, the port is released,
	allowing it to be accessed by the other consoles.
	To set the timeout value, key in a number from 0–255 seconds,
	then press [Enter].
	If the number is 0 [zero], this function is disabled. The default is
	5 seconds.
RESTORE USER	Selecting this restores the original factory default settings for
DEFAULT	VIEW and SET for the user profile. Choices are Y (Yes), or N
	(No). (This feature is not available from the KM0832
	Administrator Utility.)

86