ATEN Technology KM0832 user manual Display Duration, Set Scan, Setting Function

Chapter 3. Administrator Utility

Display Duration

Display duration determines the length of time that the port ID displays on the screen after a port change. The table below explains the choices:

Choice	Meaning
Always On	Displays the port ID at all times.
User Defined	Lets you select the amount of time (from 1–255 seconds). The
	default is 3 seconds. A setting of 0 (zero) disables this function.

Set Scan

Select the ports that are viewed under Auto Scan Mode and the duration of time that they receive the KVM focus.

Setting	Function
Scan Timer	Determines how long the KVM focus dwells on each port as it
	cycles through the selected ports in Auto Scan Mode (see F7
	SCAN, page 97). Key in a value from 1–255 seconds. The default
	is 5 seconds; a setting of 0 disables the Scan function.
Scan Mode	Selects which computers will be accessed under Auto Scan Mode
	(see F7 SCAN, page 97). Choices are:
	Personal—only those ports that the user has set as personal. See
	SET PERSONAL VIEW on page 83.
	Accessible—only those ports that the user is permitted to access.
	See Managing Port Access on page 53.
	Accessible + Powered—only those ports that the user is
	permitted to access and that have their attached computers
	powered on.
	The default is Accessible + Powered.

61