Information
S1/S2 settings
AUTO ..... Adjusts the screen size automatically
according to the S1/S2 video signal. OFF ....... Turns the S1/S2 function off.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Setting the picture size for RGB input signals
Use this procedure to switch the setting to “ON” or “OFF”. * Cannot be set in some models.
Example: Setting the “PICTURE SIZE” mode to “OFF”
Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.
1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.
The “OPTION2” screen appears.
2.Use the ▲ and ▼ buttons to select “PICTURE SIZE”.
3.To set PICTURE SIZE mode to “OFF”...
Use the and buttons to select “OFF”.
The mode switches as follows each time the or button is pressed:
ON Χ OFF
| OPTION2 |
| 2 / 3 |
PREVIOUS PAGE |
|
| |
POWER MGT. | : | OFF | |
CINEMA MODE | : | ON | |
LONG LIFE |
|
| |
GRAY LEVEL | : | 3 | |
S1/S2 | : | OFF | |
|
| : |
|
PICTURE SIZE |
| OFF | |
DVI SET UP |
|
|
NEXT PAGE |
|
|
SEL. | ADJ. | EXIT RETURN |
Information
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults. DO NO T USE W ITH VIDEO PRO CESSO R
Setting the signal and black level for DVI signal
Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.
This setting is possible only in the HDCP compatible (silver bezel) model.
Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”
Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.
1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.
The “OPTION2” screen appears.
2.Use the ▲ and ▼ buttons to select “DVI SET UP”, then press the MENU/ENTER button.
The “DVI SET UP” screen appears.
3.To set PLUG/PLAY mode to “STB/DVD”...
Use the and buttons to select “STB/DVD”.
The mode switches as follows each time the or button is pressed:
PLUG/PLAY:
BLACK LEVEL:
|
| DVI SET UP |
|
PLUG/PLAY |
| : | STB/DVD |
BLACK LEVEL | : | HIGH | |
SEL. | ADJ. | EXIT | RETURN |
Information
PLUG/PLAY settings
PC .............. When connected to the PC signal.
BLACK LEVEL is set to “LOW” automatically.
STB/DVD ... When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to “HIGH” automatically.
BLACK LEVEL settings
LOW ........... When connected to the PC signal.
HIGH .......... When connected to the SET TOP BOX,
DVD etc. Change “HIGH” into “OFF” if the black level appears gray.
30
