|
|
|
“V” | OSM | |
|
| OPTION1 |
|
|
|
BNC INPUT
:RGB
:RGB
RGB SELECT
:AUTO
HD SELECT
:1080B
INPUT SKIP
:OFF
ALL RESET
:OFF
1024768
SEL. MENU/ENTER OK
EXIT RETURN
OSM ORBITER settings
ON ........ The position of the menu will be shifted by
eight dots each time OSM is displayed. OFF ...... OSM will be displayed at the same position.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for Auto Picture.
Setting the BNC connectors
Select whether to set the input of the 5 BNC connectors to RGB and component.
Example: Set the BNC INPUT mode to “COMP.”
1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.
The “OPTION1” screen appears.
2.Use the ▲ and ▼ buttons to select “BNC INPUT”.
3.To set the BNC INPUT mode to “COMP.”...
Use the and buttons to select “COMP.”.
The mode switches as follows each time the or button is pressed:
RGB Χ COMP.
|
|
|
| OPTION1 |
| 1 / 3 | |
OSM |
|
|
|
| |||
| BNC INPUT |
|
| : | COMP. | ||
|
|
|
|
|
|
| |
| : | RGB | |||||
RGB SELECT |
| : | AUTO | ||||
HD SELECT |
| : | 1080B | ||||
INPUT SKIP |
| : | OFF | ||||
ALL RESET |
| : | OFF | ||||
|
| NEXT PAGE |
|
|
|
| |
|
| SEL. | ADJ. |
| EXIT | RETURN | |
Information
BNC INPUT Settings
RGB ......... Use the 5BNC terminals for RGB input.
COMP. ...... Use the 3BNC terminals for component
input.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Checking the signal being transmitted to RGB1 terminal
Use this to confirm the signal being transmitted to the RGB1 terminal.
It is set to RGB and can not be adjusted.
|
|
| OPTION1 |
| 1 / 3 |
OSM |
|
| |||
BNC INPUT | : | RGB | |||
|
| : | RGB | ||
|
|
| : | AUTO | |
RGB SELECT | |||||
HD SELECT | : | 1080B | |||
INPUT SKIP | : | OFF | |||
ALL RESET | : | OFF | |||
|
| NEXT PAGE |
|
| |
CAN NOT ADJUST |
|
| |||
|
|
|
|
|
|
Setting a computer image to the correct RGB select screen
With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast.
Example: Setting the “RGB SELECT” mode to “MOTION ”
1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.
The “OPTION1” screen appears.
2.Use the ▲ and ▼ buttons to select “RGB SELECT”.
3.To set the RGB select mode to “MOTION” ...
Use the and buttons to select “MOTION”.
The mode switches as follows each time the or button is pressed:
Α AUTO Χ STILL Χ MOTION Χ WIDE1 Χ WIDE2 Χ DTV ≅
|
|
|
| OPTION1 |
| 1 / 3 | |
OSM |
|
|
|
| |||
BNC INPUT |
| : | RGB | ||||
| : | RGB | |||||
| RGB SELECT |
|
| : | MOTION | ||
|
|
|
|
|
|
| |
HD SELECT |
| : | 1080B | ||||
INPUT SKIP |
| : | OFF | ||||
ALL RESET |
| : | OFF | ||||
|
| NEXT PAGE |
|
|
|
| |
|
| SEL. | ADJ. |
| EXIT | RETURN | |
23
