Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired input.
Example: Setting “AUDIO INPUT1” to “VIDEO 2”
1.On the MAIN MENU, select “AUDIO”, then press the MENU/ENTER button.
The “AUDIO” screen appears.
2.Use the ▲ and ▼ buttons to select “AUDIO INPUT1”.
3.To set the AUDIO INPUT1 to “VIDEO2”...
Use the and buttons to select “VIDEO2”.
The mode switches as follows each time the or button is pressed:
The available sources depend on the setting of “BNC INPUT”.
RGB: Α VIDEO1 Χ VIDEO2 Χ VIDEO3 Χ HD/DVD1≅
ΑRGB3 ΧRGB2 ΧRGB1 ≅
COMP.: Α VIDEO1 Χ VIDEO2 Χ VIDEO3Χ HD/DVD1≅ ΑRGB3 ΧRGB1 ΧHD/DVD2 ≅
|
|
| AUDIO |
|
|
|
|
BASS |
|
|
|
|
| ||
TREBLE |
|
|
|
|
| ||
|
|
|
|
| |||
BALANCE |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| AUDIO INPUT1 | : | VIDEO2 | ||||
|
|
|
|
|
|
| |
AUDIO INPUT2 | : | HD/DVD1 | |||||
AUDIO INPUT3 | : | RGB1 | |||||
|
| SEL. | ADJ. |
| RETURN | ||
|
| EXIT | |||||
Information
AUDIO INPUT
A single audio input cannot be selected as the audio channel for more than one input terminal.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Image Adjust Settings Menu
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position in the normal mode
1.On the MAIN MENU, select “IMAGE ADJUST”, then press the MENU/ENTER button.
The “IMAGE ADJUST” menu appears.
Default settings (when RGB/PC is selected)
IMAGE ADJUST
ASPECT MODE |
| : | NORMAL | ||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
AUTO PICTURE |
| : | OFF | ||
FINE PICTURE |
|
|
|
|
|
|
|
|
|
| |
PICTURE ADJ. |
|
|
|
|
|
|
|
|
|
| |
SEL. | ADJ. |
| EXIT | RETURN | |
*The settings on the IMAGE ADJUST menu are not preset at the factory.
To select a mode ...
Use the and buttons to select a mode.
The mode switches as follows each time the or button is pressed:
NORMAL Χ FULL
*The mode can also be switched by pressing the “WIDE” button on the remote control.
2.To adjust the vertical position ...
Use the ▲ and ▼ buttons to select “V-POSITION”.
IMAGE ADJUST
ASPECT MODE |
| : | NORMAL | |||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
AUTO PICTURE |
| : | OFF | |||
FINE PICTURE |
|
|
|
|
| |
PICTURE ADJ. |
|
|
|
|
| |
|
|
|
|
| ||
SEL. | ADJ. |
| EXIT | RETURN | ||
3. Adjust using the and buttons.
*If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.
To continue making other computer image
adjustments ...
Repeat from step 2.
21
