Information
RGB SELECT modes
One of these 6 modes must be selected in order to display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as listed in the table “Computer input signals supported by this system” on page 7 of Model Information.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)
WIDE1 ............. When an 852 dot 480 line signal
with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot 480 line signal
with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page 7 of Model Information for the details of the above settings.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Setting high definition images to the suitable screen size
Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080.
Example: Setting the “1080B” mode to “1035I”
1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.
The “OPTION1” screen appears.
2.Use the ▲ and ▼ buttons to select “HD SELECT”.
3.To set the HD SELECT mode to “1035I” ...
Use the and buttons to select “1035I”.
The mode switches as follows each time the or button is pressed:
Α1080B Χ 1035I Χ 1080A ≅
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically. |
|
1080B | Standard digital broadcasts |
1035I | Japanese “High Vision” signal format |
1080A | Special Digital broadcasts (for |
| example : DTC100) |
Setting the Input Skip
When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed.
This setting is valid only for the INPUT SELECT button on the unit.
Example: Set to “ON”
1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.
The “OPTION1” screen appears.
2.Use the ▲ and ▼ buttons to select “INPUT SKIP”.
3.To set the INPUT SKIP mode to “ON”...
Use the and buttons to select “ON”.
The mode switches as follows each time the or button is pressed:
OFF Χ ON
|
|
| OPTION1 |
| 1 / 3 | |
OSM |
|
|
|
| ||
BNC INPUT |
| : | RGB | |||
| : | RGB | ||||
RGB SELECT |
| : | AUTO | |||
HD SELECT |
| : | 1080B | |||
| INPUT SKIP |
|
| : | ON | |
ALL RESET |
| : | OFF | |||
| NEXT PAGE |
|
|
|
| |
| SEL. | ADJ. |
| EXIT | RETURN | |
Information
INPUT SKIP settings
OFF ........... Regardless of the presence of the signal,
scan and display all signals.
ON ............. If no input signal is present, skip that
signal.
*“SETTING NOW” will appear during the input search.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
|
|
|
| OPTION1 |
| 1 / 3 |
| |
OSM |
|
|
|
|
| |||
BNC INPUT |
| : | RGB |
| ||||
| : | RGB |
| |||||
RGB SELECT |
| : | AUTO |
| ||||
| HD SELECT |
|
| : | 1035 I |
| ||
|
|
|
|
|
|
|
| |
INPUT SKIP |
| : | OFF |
| ||||
ALL RESET |
| : | OFF |
| ||||
|
| NEXT PAGE |
|
|
|
|
| |
|
| SEL. | ADJ. |
| EXIT | RETURN | 24 | |
|
|
|
|
|
|
|
| |
