IBM Partner Pavilion BMD00082 SSH/Telnet Settings, Switch SSH Settings, Switch Telnet Settings

SmartConnect User’s Guide

SSH/Telnet Settings

Note – For security purposes, the ability to change SSH and Telnet settings through the BBI is disabled by default and the fields in this window are subdued. To allow the BBI to make Telnet and SSH changes, use the following CLI command: /cfg/sys/access/tsbbi enable.

Switch SSH Settings

Use these fields to configure Secure Shell (SSH) settings.

Table 10-13SSH Configuration Fields

Field	Description
SSH Time Interval	Set the interval for auto-generation of the RSA server key.
SSH Port	Sets the SSH server TCP port number.
SSH Generate Host Key	Generates the RSA host key.
SSH Generate Server Key	Generates the RSA server key.
SSH Server State	Enables or disables the SSH server.
SCP Admin Password	Set the administration password for SCP access.
SCP Apply and Save	Enables or disables SCP apply and save.

Switch Telnet Settings

Use these fields to configure Telnet settings.

Table 10-14	DSCP Configuration Fields
Field	Description
Telnet Access	Enables or disables Telnet access.
Telnet Port	Sets an optional telnet server TCP port number for cases where the
	server listens for telnet sessions on a non-standard port.

BMD00082, February 2009 Chapter 10: System Settings „ 127