
SmartConnect User’s Guide
TACACS+
VSE SmartConnect software supports authentication and authorization using the Cisco Sys- tems TACACS+ protocol.
Table 10-7 TACACS+ Fields
Field | Description |
|
|
Tacacs+ | Enables or disables the TACACS+ server. |
|
|
Port | Displays the number of the TCP port for TACACS+. |
|
|
Tacacs+ Primary Server | Defines the primary TACACS+ server IP address. |
|
|
Tacacs+ Secondary Server | Defines the secondary TACACS+ server IP address. |
|
|
Tacacs+ Secret | Sets the shared secret between the Virtual Switch Extension (VSE) for |
| IBM BladeCenter, SmartConnect, and the TACACS+ server(s). |
|
|
Tacacs+ timeout | Displays the amount of time, in seconds, before a TACACS+ server |
| authentication attempt is considered to have failed. |
|
|
Tacacs+ retries | Displays the number of failed authentication requests before switching to |
| a different TACACS+ server. |
|
|
Tacacs+ Backdoor for tel- | Displays the status of the TACACS+ back door for Telnet. This command |
net/ssh/http/https | does not apply when secure backdoor is enabled. |
|
|
Tacacs+ Secure Backdoor | Displays the status of the TACACS+ back door using secure password for |
for telnet/ssh/http/https | Telnet/SSH/ HTTP/HTTPS. This command does not apply when back- |
| door is enabled. |
|
|
Tacacs+ password change | Enables or disables TACACS+ password change. |
|
|
Tacacs+ command authori- | Displays the status of TACACS+ command authorization. |
zation |
|
|
|
Tacacs+ command logging | Displays the status of TACACS+ command logging. |
|
|
Tacacs+ new privilege | Displays the status of the TACACS+ new |
level mapping |
|
|
|
BMD00082, February 2009 | Chapter 10: System Settings 123 |