
SmartConnect User’s Guide
ServerMobility Port Information
The following table describes the ServerMobility Port information fields.
Table | Server Mobility Port information | |
|
| |
Field | Description | |
|
| |
Displays the client identifier value (option 61) that will be encoded by the | ||
| switch in the DHCP request packets received on the port. | |
|
| |
Displays the relay agent circuit ID | ||
| DHCP request packets received on the port. | |
|
| |
Displays the relay agent remote ID | ||
| the DHCP request packets received on the port. | |
|
| |
Server Mobility | Displays the current ServerMobility status of the port (enabled or disabled). | |
|
| |
Filtering | Displays the current DHCP filtering status of the port (enabled or disabled). | |
|
| |
Failover Port | Displays the backup port or the active port associated with the port. | |
|
| |
Failover State | Displays the current failover status of the port, as follows: | |
| | active |
| | standby |
| | fail |
| If the failover state of the port is active, DHCP requests received on the port |
will be relayed by the switch.
If the failover state is standby or fail, the DHCP requests will not be relayed. The switch will respond to DHCP requests received on standby ports with a temporary IP address.
See also:
“ServerMobility General Configuration” on page 115
“ServerMobility Port Information” on page 146
146 Chapter 12: Switch Information | BMD00082, February 2009 |