IBM Partner Pavilion BMD00082 manual ACL Metering Settings, ACL Remark Control

SmartConnect User’s Guide

ACL Metering Settings

The following table describes the ACL metering configuration controls:

Table 9-5ACL Metering Configuration Fields

Field	Description
Committed rate	Configures the committed rate, in Kilobits per second. The committed
	rate must be a multiple of 64.
Maximum burst size	Configures the maximum burst size, in Kilobits. Enter one of the fol-
	lowing values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Set out-of-profile Drop or	Configures the ACL Meter to either drop or pass out-of-profile traffic.
Pass
Enable	Enables or disables the ACL meter.

ACL Remark Control

The following table describes the ACL remarking configuration controls:

Table 9-6ACL Remarking Configuration Fields

Field	Description
Set in-profile update DSCP	Enables or disables DiffServ Code Point (DSCP) updates for In-Profile
enable	packets.
Set in-profile update DSCP	Sets the DSCP of In-Profile packets to the selected value.
Set out-of-profile update	Enables or disables DSCP updates for Out-of-Profile packets.
DSCP enable
Set out-of-profile update	Sets the DSCP of Out-of-Profile packets to the selected value.
DSCP

See also:

„“Virtual Switch Groups Membership” on page 97

„“Access Control List Sets” on page 111

110 „ Chapter 9: Switch Policies BMD00082, February 2009