
SmartConnect User’s Guide
Virtual Switch Group Information
The following table describes the VSG information fields.
Table 12-4 Virtual Switch Group Information Fields
Field | Description |
|
|
VM MAC Address | Displays a list of the MAC addresses of Virtual Servers that are mem- |
| bers of the VSG. Optional. |
|
|
Internal Ports | Displays a list of the internal port members in the VSG. Optional. |
|
|
Ports in External Trunk 1 | Displays a list of external ports that are members of the first external |
| trunk of the VSG. |
|
|
Ports in External Trunk 2 | Displays a list of external ports that are members of the second external |
| trunk of the VSG. |
|
|
Oper Disabled External Ports | Displays a list of ports that were disabled due to trunk policy because of |
| different type ports member in same external trunk or too many ports of |
| same type member in same external trunk. |
|
|
External Trunk | Displays a list of the list of ports which are members in the second |
| external trunk of the group. |
|
|
LACP | Displays the LACP status of the VSG (enabled or disabled). |
|
|
IGMP | Displays the status of IGMP Snooping for the VSG (enabled or dis- |
| abled). |
|
|
Failover | Displays the Failover status of the VSG (enabled or disabled) |
|
|
Failover Limit | Displays the number of ports in the VSG that must fail before Failover |
| occurs. |
|
|
BPDU Policy | Displays the BPDU Policy setting (drop, guard, or flood). |
|
|
ACL SCM Group config | Displays the ACLs configured for the group. |
|
|
Note – For port numbers, if a switch is part of a
BMD00082, February 2009 | Chapter 12: Switch Information 141 |