SmartConnect User’s Guide
Configuring Management Module for Switch Access
Complete the following initial configuration steps:
1.Connect the Ethernet port of the management module to a 10/100 Mbps network (with access to a management station) or directly to a management station.
2.Access and log on to the management module, as described in the blade server chassis Management Module User’s Guide.
The management module provides the appropriate IP addresses for network access (see the applicable blade server chassis Installation and User’s Guide publications for more informa- tion).
3.Select I/O Module Tasks > Configuration on the menu on the left side of the blade server chassis Management Module window.
Figure 6-A Switch Configuration in the Management Module Window
BMD00082, February 2009 | Chapter 6: Configuring Switch Access 65 |
