
SmartConnect User’s Guide
ServerMobility
These windows display information about the ServerMobility feature:
“ServerMobility General Information” on page 145
“ServerMobility Port Information” on page 146
ServerMobility General Information
The following table describes the general ServerMobility information fields.
Table 12-10 ServerMobility General information
Field | Description |
|
|
ServerMobility settings | Displays the current ServerMobility status (enabled or disabled). |
|
|
ServerMobility Encoding | Displays the current scheme used for encoding the Client Identifier |
Scheme | (option 61) and Relay Agent Information (option 82) in DHCP request |
| packets. |
|
|
ServerMobility ports | Displays the ports that have ServerMobility enabled. |
|
|
DHCP request filtering | Displays the ports on which filtering of DHCP request information is |
enabled ports | enabled. |
|
|
Relay on | Displays the current BOOTP relay status (enabled or disabled) for all |
ity ports | ports that have ServerMobility disabled. |
|
|
Displays the active ServerMobility ports and their backup ports. | |
|
|
Displays the current DHCP failover status (enabled or disabled) of | |
| ServerMobility ports. |
|
|
Displays the current lease time of the temporary IP addresses that are | |
| assigned by the switch to blade servers connected to a backup (standby) |
| ServerMobility ports. |
|
|
Note – For port numbers, if a switch is part of a
See also:
“ServerMobility General Configuration” on page 115
“ServerMobility Port Information” on page 146
BMD00082, February 2009 | Chapter 12: Switch Information 145 |