
SmartConnect User’s Guide
Statistics Menu
The Statistics Menu (/stats) allows you to view performance statistics for the switch.
[Statistics Menu] |
| |
port | - Port Stats Menu | |
clrports | - Clear stats for all ports | |
l2 | - Layer 2 | Stats Menu |
l3 | - Layer 3 | Stats Menu |
mp | - | |
ntp | - Show NTP stats | |
dump | - Dump all stats |
Configuration Menu
The Configuration Menu (/cfg) allows an administrator to configure switch parameters. Configuration changes are not active until explicitly applied. You can save changes to
[Configuration Menu]
sys | - |
port | - Port Menu |
global | - Global Menu |
group | - Group Menu |
pmirr | - Port Mirroring Menu |
dump | - Dump current configuration to script file |
ptcfg | - Backup current configuration to FTP/TFTP server |
gtcfg | - Restore current configuration from FTP/TFTP server |
Operations Menu
The Operations Menu (/oper) is used for making immediate, temporary changes to the operational configuration of the switch. For example, you can immediately disable a port (without the need to apply or save the change), with the understanding that when the switch is reset, the port returns to its normally configured operation.
[Operations Menu]
port | - Operational Port Menu | ||
prm | - Protected Mode | Menu | |
passwd | - Change current | user password | |
clrlog | - | Clear syslog messages | |
ntpreq | - | Send NTP request |
BMD00082, February 2009 | Chapter 5: Command Reference 59 |