SmartConnect User’s Guide
Boot Options Menu
The Boot Options Menu (/boot) is used for upgrading switch software, selecting config- uration blocks, and for resetting the switch when necessary.
[Boot Options | Menu] |
image | - Select software image to use on next boot |
conf | - Select config block to use on next boot |
gtimg | - Download new software image via FTP/TFTP |
ptimg | - Upload selected software image via FTP/TFTP |
reset | - Reset switch |
cur | - Display current boot options |
To use the Boot Options Menu, you must be logged in as the administrator. The Boot Options Menu provides options for:
Selecting a software image to be used when the switch is next reset
Selecting a configuration block to be used when the switch is next reset
Downloading or uploading a new software image to the switch via FTP/TFTP
Maintenance Menu
The Maintenance Menu (/maint) allows you to generate a dump of the critical state information, and to clear entries in the forwarding database and the ARP and routing tables.
[Maintenance Menu]
sys | - System Maintenance Menu |
fdb | - Forwarding Database Manipulation Menu |
debug | - Debugging Menu |
arp | - ARP Cache Manipulation Menu |
igmp | - IGMP Multicast Group Menu |
uudmp | - Uuencode FLASH dump |
ptdmp | - Upload FLASH dump via FTP/TFTP |
cldmp | - Clear FLASH dump |
tsdmp | - Tech support dump |
pttsdmp | - Upload tech support dump via FTP/TFTP |
60 Chapter 5: Command Reference | BMD00082, February 2009 |
