Standard Horizon GM29 manual 16.15 AT+CLIR Calling Line Identification Restriction

16. SUPPLEMENTARY SERVICES

<m>	Description
0	CLIP not provisioned
1	CLIP provisioned
2	Unknown (e.g. no network)

Unsolicited Result codes:

+CLIP: <number>, <type>,,,<alpha> Defined values:

<number>	Description
String	Type phone number of format specified by <type> type of
	address octet in integer format (refer to GSM 04.08, sub-
	clause 10.5.4.7)

<type> Description

129129 ISDN/telephony numbering plan, national/ international unknown

	145		145 ISDN/telephony numbering plan, international number
		161	161 ISDN/telephony numbering plan, national number
	128-255		Other values refer to GSM 04.08 section 10.5.4.7
16.15 AT+CLIR	Calling Line Identification Restriction
		Description		Command	Possible Responses
		Request calling line		AT+CLIR=[<n>]	•	+CME ERROR <err>
		identification restriction			•	OK
					• ERROR
		Read the current		AT+CLIR?	•	+CLIR: <n>,<m>
		setting			•	+CME ERROR <err>
					• OK
					• ERROR
		Test if the command is		AT+CLIR=?	• +CLIR: (list of supported
		supported				<n>s)

• +CME ERROR <err>

• OK

• ERROR

This command refers to CLIR-service according to GSM 02.81 that allows a calling subscriber to enable or disable the presentation of the CLI to the called party when originating a call.

Set command overrides the CLIR subscription (default is restricted or allowed) when temporary mode is provisioned as a default adjustment for all following outgoing calls. Using the opposite command can

253

LZT 123 7361 R1A