GM29 INTEGRATOR’S MANUAL
2.3 ATD | Dial |
|
|
|
|
|
|
| |
| Description | Command | Possible Responses | |
|
|
|
|
|
| • Originate a call and | ATD<dial_string>[;] | • | CONNECT |
| dial the phone |
| • | CONNECT <text> |
| number specified in |
| • NO CARRIER | |
| the command as |
| ||
|
| • | ERROR | |
| <dial_string> |
| ||
| or |
| • NO DIAL TONE | |
| • Do a network |
| • BUSY | |
| detect |
| • OK | |
|
|
|
|
|
Dial the phone number ATD>ME<I>[;] stored in the mobile
phone which is located by the index <I>
•CONNECT
•CONNECT <text>
•NO CARRIER
•ERROR
•NO DIAL TONE
•BUSY
•OK
Dial the phone number ATD>SM<I>[;] | • | CONNECT | |
stored in the SIM card | • | CONNECT <text> | |
which is located by the | • NO CARRIER | ||
index <I> | |||
• ERROR | |||
| |||
| • NO DIAL TONE | ||
| • | BUSY | |
| • OK | ||
|
|
|
Dial the phone number ATD>LD<I>[;] stored in the Last
dialled number list on the SIM card, which is located by the index <I>
The most recently dialled number is assumed to have <I>="1"
•CONNECT
•CONNECT <text>
•NO CARRIER
•ERROR
•NO DIAL TONE
•BUSY
•OK
Redial the last phone | ATDL[;] | ... |
number dialled. |
|
|
Ericsson specific |
|
|
|
|
|
Used to initiate a phone connection, which may be data or voice (phone number terminated by semicolon). The phone number used to establish the connection will consist of digits and modifiers, or a stored number specification.
If the dial string is followed by a semicolon this informs the phone that the number is a voice rather than a data number.
If the dial string is omitted, and the semicolon included, the command instructs the ME to do a network detect. If the network is available OK is returned.
Abortability:
Aborting an ATD command is accomplished by the transmission from the DTE to the DCE of any character. A single character shall be sufficient to abort the command in progress; however, characters
62
LZT 123 7361 R1A