Standard Horizon GM29 manual 13.15 AT+CSMP Set Text Mode Parameters, At+Csmp?, At+Csmp=?

GM29 INTEGRATOR’S MANUAL

13.15 AT+CSMP Set Text Mode Parameters

Only Applicable to Text Mode

Description	Command	Possible Responses
Set the text mode	AT+CSMP=[<fo	•	+CME ERROR: <err>
parameters	> [,<vp>[,<pid>	•	OK
	[,<dcs>]]]]	• ERROR
Display current	AT+CSMP?	•	+CSMP: <fo>,<vp>,<pid>,<dcs>
settings		•	+CME ERROR: <err>
Show if the	AT+CSMP=?	• +CSMP: (List of supported <fo>s),
command is			(list of supported <vp>s), (list of
supported			supported <pid>s), (list of
			supported <dcs>s)

• +CME ERROR: <err>

• OK

• ERROR

Used to select values for additional parameters needed when SM is sent to the network or placed in a storage when text format message mode is selected. It is possible to set the validity period starting from when the SM is received by the SMSC (<vp> is in range 0… 255). The <pid> parameter identifies the higher protocol being used or indicates interworking with a certain type of telematic service and <dcs> determines the way the information is encoded as in GSM 03.38.

<fo>	Description
0-255	Depending on the command or result code: first octet of
	GSM 03.40 SMS-DELIVER, SMS-SUBMIT (default value
	17),SMS-STATUS-REPORT, or SMS-COMMAND (default value
	2) in integer format
<vp>	Description
0-143	(TP-VP+1) x 5 minutes (i.e 5 minutes intervals up to 12 hous)
144-167	12 hours + ((TP_VP-143) x 30 minutes)
168-196	(TP-VP-166) x 1 day
197-255	(TP-VP-192) x 1 week
<pid>	Description
0-255	Protocol Identifier in integer format. Default value is 0,
	according to 07.05 section 9.2.3.9
<dcs>	Description
0-255	Data coding scheme. See GSM 03.38. UCS2 and
	compressed text not supported

210

LZT 123 7361 R1A