Standard Horizon GM29 15.8 AT*E2STKN M2M STK Envelope Menu Selection, AT*E2STKN=?, Call Error

GM29 INTEGRATOR’S MANUAL

The parameters have no default values.

15.8 AT*E2STKN	M2M STK Envelope (Menu Selection)
	Description	Command	Possible responses
	Do the menu	AT*E2STKN=<sel_item>	•	+CME ERROR <err>
	selection		•	OK
			• ERROR
	Test if the	AT*E2STKN=?	• *E2STKN: (list of supported
	command is			<sel_item>)
	supported		• +CME ERROR <err>
			• OK
			• ERROR
	The application informs the ME about the selected menu item by means
	of the AT*E2SKTN command. The ME answers with OK, or ERROR.
	The Do command allows the external application to select the menu
	item in the item list that was created by means of the SET-UP MENU
	command.
	<sel_item>	Description
	Integer type	The identifier is a single byte between 1 and 255. It
		identifies the selected menu item corresponding to SET-UP
		MENU command. Values follow the definition described in
		GSM 11.14
15.9 AT*E2STKC	M2M STK Set Up Call
	Description	Command		Possible responses
	Answer to the	AT*E2STKC=<answer>		•	+CME ERROR <err>
	reception of SET UP			•	OK
	CALL			• ERROR
	Test if the	AT*E2STKC=?		• *E2STKC: (list of supported
	command is				<answer>)
	supported			•	+CME ERROR <err>

• OK

• ERROR

The ME passes the parameters within SET UP CALL command to the external application by means of the unsolicited result code *E2STKC, so that it takes up the decision on progressing or rejecting the call.

Answer command allows the external application to send the appropriate answer after receiving the unsolicited result code, and before the timeout expires.

If Answer command is sent once the timeout expires, an ERROR response is generated.

228

LZT 123 7361 R1A