Standard Horizon GM29 manual AT*E2FAX Ericsson M2M Fax Comm. Baud Rate Modification, AT*E2FAX?

8. Fax

8.1 AT*E2FAX	Ericsson M2M Fax Comm. Baud Rate Modification
	Description	Command	Possible Responses
	Request change of fax	AT*E2FAX= <RcV>	•	ERROR
	comm. baud rate		• OK
	Displays currently set	AT*E2FAX?	•	*E2FAX: <RcV>
	rate		•	ERROR
	Shows if the command	AT*E2FAX=?	•	*E2FAX: (list of
	is supported			supported <RcV>s)

• ERROR

This command allows the modification of the factory default RS232 comm. setting between standard 9600 baud and 19200 baud. This is needed as the addition of fax capabilities, within the module, require communication between fax applications and the module to run at a higher baud rate than the fax transmission baud rate (In this case the fastest transmission rate is 9600 baud). Once this command has been performed, the user must then execute the AT&F command to reset the module with the new RS232 comm's baud rate.

The AT*E2FAX command allows the user to:

•“Configure” the RS232 Comm. speed default factory profile, specifying whether the speed should be 9600 baud (standard) or 19200 baud for FAX application comm. This value will then be used once the AT&F command is next used.

•“Read” what value this default factory profile has been set to.

<RcV>	Description
0	Configure RS232 default setting to 9600 baud
1	Configure RS232 default setting to 19200 baud

Examples

AT*E2FAX=?

*E2FAX= (0-1)

OK

129

LZT 123 7361 R1A