Standard Horizon GM29 manual 11.10 AT+CIMI Subscriber Identification, 11.11 AT+CLCK

GM29 INTEGRATOR’S MANUAL

11.10 AT+CIMI	Subscriber Identification
	Description		Command		Possible Responses
	Read IMSI		AT+CIMI		• <IMSI>
					• +CME ERROR <err>
					• OK
					• ERROR
	Show if the command		AT+CIMI=?		• OK
	is supported				• ERROR
	Causes the TA to return <IMSI>, identifying the individual SIM
	attached to the ME.
	<IMSI>	Description
	string without	International Mobile Subscriber Identity
	double quotes
11.11 AT+CLCK	Facility Lock
	Description		Command	Possible Responses
	Request facility lock		AT+CLCK=<fac>,	•	when <mode>=2 and
			<mode>[,<passwd>		command successful:
			[,<class>]]		+CLCK:
					<status>[,<class1>
					[<CR><LF>+CLCK:
					<status>,<class2>[...]]
				• +CME ERROR <err>
				• OK
				• ERROR
	Show if the		AT+CLCK=?	•	+CLCK: (list of
	command is				supported <fac>s)
	supported			•	+CME ERROR <err>

• OK

The command is used to lock, unlock or interrogate an ME or a network facility <fac>. A password is normally needed to carry out such actions.

Call barring facilities are based on GSM supplementary services (refer to GSM 02.88). The interaction of these, with other commands based on other GSM supplementary services, is described in the GSM standard.

<fac>	Description
“CS”	CNTRL (lock CoNTRoL surface (e.g. phone keyboard))
“PS”	PH-SIM (lock PHone to SIM card) (ME asks password when
	other than current SIM card inserted)
“SC”	SIM (lock SIM card) (SIM asks password in ME power-up
	and when this lock command issued)
“FD”	SIM fixed dialling feature. PIN2 is required as a password
“P2”	SIM PIN2

158

LZT 123 7361 R1A