GM29 INTEGRATOR’S MANUAL
3.19 AT+CLAC List all available AT Commands
Command | Possible Responses |
|
|
+CLAC | <AT Command1> [<CR> <LF> <AT Command2>[…]] |
| +CME ERROR: <err> |
+CLAC=? | +CME ERROR: <err> |
|
|
Causes the ME to return one or more lines of AT commands. This command has the same functionality as AT*.
Note! This command only returns the AT commands that are available to the user.
3.20 AT+CMEE Mobile Equipment Error
Description | Command | Possible Responses |
|
|
|
Request GSM Mobile | AT+CMEE=[<n>] | • OK |
Equipment Error |
| • ERROR |
Control |
|
|
Read the command | AT+CMEE? | • +CMEE: <n> |
|
| • OK |
|
| • ERROR |
|
|
|
Show if the command | AT+CMEE=? | • +CMEE: (list of |
is supported |
| supported <n>s) |
|
| • OK |
|
| • ERROR |
|
|
|
Disables or enables the use of result code +CME ERROR: <err> as an indication of an error relating to the functionality of the ME. When enabled, ME related errors cause +CME ERROR: <err> final result code instead of the regular ERROR final result code. ERROR is returned normally when error is related to syntax, invalid parameters, or TA functionality. For more information, refer to “+CME ERROR (Mobile Equipment Error Code)”, page 57.
<n> | Description |
|
|
0 | Disable +CME ERROR: <err> result code and use ERROR |
| instead. Default value |
1 | Enable +CME ERROR: <err> result code and use numeric |
| <err> values (see page 57) |
|
|
2 | Enable +CME ERROR: <err> result code and use verbose |
| <err> values (see page 57) |
|
|
80
LZT 123 7361 R1A
