Standard Horizon GM29 ATS7 Connection Completion Timeout, ATS8 Comma Dial Modifier Delay Control

3. CONTROL AND STATUS

3.8 ATS7	Connection Completion Timeout
		Description		Command	Possible Responses
		Set connection		ATS7=[<tmo>]	•	OK
		completion timeout			•	ERROR
		Read the current		ATS7?	<tmo>
		setting
		Show if the command		ATS7=?	S7: (list of supported
		is supported			<tmo>s)
		Defines the maximum time allowed between completion of dialling and
		the connection being established. If this time is exceeded then the
		connection is aborted.
		<tmo>	Description
		50	Timeout value in seconds. Default value
	1-255		Timeout value in seconds
3.9 ATS8	Comma Dial Modifier Delay Control
		Description		Command	Possible Responses
		Set Comma Dial		ATS8=[<dly>]	•	OK
		Modifier Delay Control			•	ERROR
		Read the current		ATS8?	<dly>
		setting.
		Show if the command		ATS8=?	S8: (list of supported
		is supported.			<dly>s)
		Included for compatibility. No functionality
		<dly>	Description
		2	The value of the dial modifier delay in seconds. Default value
	1-255		The value of the dial modifier delay in seconds

73

LZT 123 7361 R1A