GM29 INTEGRATOR’S MANUAL
The specified rate takes effect following the issuance of any result code(s) associated with the current command line.
<rate> | Description |
|
|
Discrete | The <rate> value specified shall be the rate in bits per |
integer value | second at which the |
| e.g. “19200” or “115200”. The rates supported by a |
| particular DCE are manufacturer specific. |
The following rates, are supported; 1200 2400 4800 9600 19200 38400 57600 115200 230400 460800
10.15 AT*E2ESC M2M Escape Sequence Guard Time
Description | Command | Possible responses |
|
|
|
Set GPRS online | AT*E2ESC=[<gt>] | • OK |
command guard time |
| • ERROR |
|
|
|
Read the current | AT*E2ESC? | *E2ESC: <gt> |
setting |
|
|
|
|
|
Show if the command | AT*E2ESC=? | • OK |
is supported |
| • ERROR |
|
|
|
Defines a guard time for the escape sequence in GPRS to return to on- line command mode i.e. if +++AT<CR> is received either as part of the data stream or a terminating string from the application and no further data is received for the duration of the guard time the modem will go into on line command mode. This guards against the modem accidentally going into on line command mode. The verbose format of
+++AT<CR> is <S2><S2><S2>AT<S3>.
<gt> | Description |
|
|
0 | No guard time. Default value |
|
|
Guard time in seconds | |
|
|
144
LZT 123 7361 R1A
