Standard Horizon GM29 manual Text is entered ctrl-Z/ESC

GM29 INTEGRATOR’S MANUAL

TE on successful message delivery. Optionally (when +CSMS <service> value is 1 and network supports) <ackpdu> is returned. Values can be used to identify message upon unsolicited delivery status report result code. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command is abortable.

	<length>	Description
	Integer type	Value indicating in PDU mode (+CMGF=0), the length of
		the actual TP data unit in octets (i.e. the RP layer SMSC
		address octets are not counted in the length)
	<pdu>	Description
	String	In the case of SMS: GSM 04.11 SC address followed by
		GSM 03.40 TPDU in hexadecimal format: ME/TA converts
		each octet of TP data unit into two IRA character long
		hexadecimal number (e.g. octet with integer value 42 is
		presented to TE as two characters 2A (IRA 50 and 65))
		In the case of CBS: GSM 03.41 TPDU in hexadecimal format
	<mr>	Description
	Integer type	GSM 03.40 TP-Message-Reference in integer format
	<ackpdu>	Description
	String	GSM 03.40 RP-User-Data element of RP-ACK PDU; format is
		same as for <pdu> in case of SMS, but without GSM 04.11
		SC address field and parameter shall be bounded by
		double quote characters like a normal string type
		parameter
Text Mode
	Description	Command	Possible Responses
	Send command	AT+CMGC=<fo>,<ct>[,<pid>	• if PDU mode
	message	[,<mn>[,<da>[,<toda>]]]]	(+CMGF=1) and
		<CR>	sending successful:
		Text is entered<ctrl-Z/ESC>	+CMGC:
			<mr>[,<scts>]
			• if sending fails:
			+CMS ERROR: <err>
			• OK
			• ERROR
	Show if the	AT+CMGC=?	• OK
	commands is		• ERROR
	supported

Sends a command message from a TE to the network (SMS- COMMAND). The entering of text is as specified in the send message command, +CMGS, but the format is fixed to be a sequence of two IRA character long hexadecimal numbers, which the ME/TA converts into

192

LZT 123 7361 R1A