10. INTERFACE
Commands included on the same command line as the Z command will be ignored.
| <profile > | Description |
|
|
| ||
| 0 | Select the user profile to restore | |
|
| ||
10.9 AT+CMUX Switch to 07.10 Multiplex Protocol | |||
|
|
|
|
| Description | Command | Possible Responses |
|
|
|
|
| Switch to 07.10 | AT+CMUX=<transpa | +CME ERROR: <err> |
|
| rency>[,<subset>[, |
|
|
| <port_speed>[,<N1> |
|
|
| [,<T1>[,<N2>[,<T2> |
|
|
| [,<T3>[,<k>]]]]]]]] |
|
| Returns current | AT+CMUX? | • +CMUX:<transparency>, |
| setting for |
| <subset>,<port_speed>,<N1> |
| multiplexer |
| ,<T1>,<N2>,<T2>,<T3>[,<k>] |
|
|
| • +CME ERROR: <err> |
| Show list of | AT+CMUX=? | • +CMUX: (list of supported |
| supported |
| <transparency>s), |
| services |
| (list of supported <subset>s), |
|
|
| (list of supported |
|
|
| <port_speed>s), |
|
|
| (list of supported <N1>s), |
|
|
| (list of supported <T1>s), |
|
|
| (list of supported <N2>s), |
|
|
| (list of supported <T2>s), |
|
|
| (list of supported <T3>s), |
|
|
| (list of supported <k>) |
• +CME ERROR: <err>
SI
The command is used to turn on the multiplexer. Only “no transparency is supported”. The parameter <k> is not used.
The default values for the parameters below are for “no transparency” and “only UIH frames used”.
<transparency> | Description |
|
|
0 | No transparency |
|
|
|
|
<subset> | Description |
|
|
0 | Only UIH frames used |
|
|
139
LZT 123 7361 R1A
