Standard Horizon GM29 manual Radio Link Protocol, At+Crlp?, At+Crlp=?

5. DATA - CSD/HSCSD

5.2 AT+CRLP	Radio Link Protocol
	Description	Command	Possible Responses
	Set radio link	AT+CRLP=[<iws>	•	OK
	protocol	[,<mws>[,<T1>	•	ERROR
		[,<N2>[,<ver>
		[, <T4>]]]]]]
	Read the	AT+CRLP?	• +CRLP:
	command			<iws>,<mws>,<T1>,<N2>[,<ver1>
				[,<T4>]][<CR><LF>
			•	+CRLP:
				<iws>,<mws>,<T1>,<N2>[,<ver2>
				[,<T4>]][...]]
			• OK
			• ERROR
	Test if the	AT+CRLP=?	• +CRLP: (list of supported <iws>s),
	command is			(list of supported <mws>s),
	supported			(list of supported <T1>s),
				(list of supported<N2>s)[,<ver1>
				[,(list of supported <T4>s)]]
				[<CR><LF>+CRLP: (list of
				supported <iws>s), (list of
				supported <mws>s), (list of
				supported <T1>s), (list of
				supported <N2>s)[,<ver2>[,(list of
				supported <T4>s)]][...]]

• OK

• ERROR

Radio link protocol (RLP) parameters used when non-transparent data calls are originated may be altered with this command. Available command subparameters depend on the RLP versions implemented by the device (e.g. <ver> may not be available if device supports only versions 0 and 1).

Read command returns current settings for each supported RLP version <verx>. Only RLP parameters applicable to the corresponding <verx> are returned.

Test command returns values supported by the TA as a compound value. If ME/TA supports several RLP versions <verx>, the RLP parameter value ranges for each <verx> are returned in a separate line.

<iws>Description

120IWF to MS window size

0- 496

<mws> Description

120MS to IWF window size

0- 496

107

LZT 123 7361 R1A