11. NETWORK
<service> | Description |
|
|
0 | Asynchronous modem |
|
|
4 | Voice |
|
|
5 | Fax |
|
|
|
|
<itc> | Description |
|
|
0 | 3.1kHz |
|
|
1 | UDI |
|
|
11.13 AT+COLP Connected Line Identification Presentation
Description | Command | Possible Responses | |
|
|
|
|
Request connected | AT+COLP=[<n>] | • | OK |
line identification |
| • | ERROR |
presentation |
|
|
|
Show the current | AT+COLP? | • | +COLP: <n>,<m> |
setting |
| • | OK |
|
| • ERROR | |
Show if the command | AT+COLP=? | • | +COLP: (list of |
is supported |
|
| supported <n>s) |
• OK
• ERROR
This command refers to the GSM/UMTS supplementary service COLP (Connected Line Identification Presentation) that enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the execution of the supplementary service COLR in the network.
When enabled (and allowed by the called subscriber), +COLP: <number>,<type>[,<subaddr>,<satype> [,<alpha>]] intermediate result code is returned from the TA to the TE before any +CR or V.25ter responses. It is manufacturer specific if this response is used when normal voice call is established.
Read command gives the status of <n>, and also triggers an interrogation of the provision status of the COLP service according 3GPP TS 22.081 (given in <m>).
161
LZT 123 7361 R1A
