13.10 AT+CNMI New Message Indications to TE | Standard Horizon GM29

GM29 INTEGRATOR’S MANUAL

13.10 AT+CNMI New Message Indications to TE

PDU Mode

Description	Command	Possible Responses

Set new message	AT+CNMI=[<mode>	• +CMS ERROR: <err>
indication to TE	[,<mt>[,<bm>[,<ds>	•	OK
	]]]]	• ERROR
		• ERROR

Shows the current	AT+CNMI?	•	+CNMI:
setting			<mode>,<mt>,<bm>,<ds>
		• OK
		• ERROR
Show if the	AT+CNMI=?	•	+CNMI:
command is			(list of supported <mode>s),
supported			(list of supported <mt>s),
			(list of supported <bm>s),
			(list of supported <ds>s)

• OK

• ERROR

Selects the procedure for the way in which new messages received from the network, are indicated to the TE when it is active, e.g. DTR signal is ON. If the TE is inactive (DTR signal is OFF), message receiving is carried out as specified in GSM 03.38 (3G TS 23.038).

If the command fails and the error is related to mobile equipment or network, the final result code CMS ERROR: <err> is returned.

<mode>	Description

3	Forward unsolicited result codes directly to the TE. TA-TE
	link specific inband technique used to embed result
	codes and data when TA is in on-line data mode

194

LZT 123 7361 R1A

Image 194

Standard Horizon GM29 manual 13.10 AT+CNMI New Message Indications to TE, At+Cnmi?, At+Cnmi=?

Contents

GM29 Integrator’s Manual First edition October Contents Part 3 Using AT Commands Audio 129 Network 145 Short Message Services Cell Broadcast 215 Alphabetical Listing of AT Commands 261 GM29 INTEGRATOR’S Manual Part 1 Overview Page Prerequisites IntroductionTarget Users Manual Structure Highlights GM29 ModemDescription Main Blocks in a Wireless System GM29 in a Communication System Interface between the modem and the Application Main Features and Services Gmsk Ussd Network registration Call barring Call transfer Service and Support Precautions Abbreviations Explanations GM29 INTEGRATOR’S Manual Part 2 Integrating the Modem Page Mechanical Description Overview GM29 INTEGRATOR’S Manual Physical Dimensions Power Connector Electrical Description Hrin Audio ConnectorVCC Toin Bearp MicnBearn Micp Antenna Connector Table below shows the antenna electrical characteristics SIM Card Reader DTR GND DSR RS232 Serial PortDCD RTS CTS Serial Data Software Updates Real Time Clock Resetting the Modem Switching On the ModemSwitching Off the Modem Operation Operating States/LED Safety Advice and Precautions Hints for Integrating the Modem Installation of the Modem How to Install the Modem Antenna Possible communication disturbances include the following Accessories Technical Data Data Features Power Consumption Radio Specifications LED Mechanical Specification Certification Declaration of Conformity GM29 INTEGRATOR’S Manual Part 3 Using AT Commands Page Introduction to AT Commands Syntax Description ATcommandparameter AT*command=parameter AT+command parameter AT*command parameter Error Codes 2 +CMS Error Message Service Failure Result Code Examples on How to Use the AT Commands GM29 INTEGRATOR’S Manual PIN Control Call ControlAT+CPIN ATA Busy ATD DialNo Dial Tone Dialstring Description ATP Select Pulse Dialling ATO Return to Online Data ModeATH Hang up ATT Select Tone Dialling Hang up Call ATX Call Progress Monitoring ControlAT+CHUP AT+CMOD=? 10 AT+CMOD Call ModeAT+CMOD? 11 AT+CVHU Voice Hang-Up 12 AT+VTS Dtmf and Tone Generation Dtmf Ascii ATS0 Automatic Answer Control Control and StatusATQ Result Code Suppression ATS2 ATS3 Command Line Termination CharacterATS2 Escape Sequence Character ATS3? ATS4 Response Formatting Character ATS4? ATS5? ATS5 Command Line Editing Character BackspaceATS6 Blind Dial Delay Control ATS6? ATS7? ATS7 Connection Completion TimeoutATS8 Comma Dial Modifier Delay Control ATS8? 10 ATS10 Automatic Disconnect Delay Control 11 AT*ECAM Ericsson Call Monitoring AT*EDST=? 12 AT*EDST Ericsson Daylight Saving TimeAT*EDST? AT*EMAR=? 13 AT*EMAR Ericsson Master Reset14 AT*EPEE Ericsson Pin Event AT+CLCK 16 AT+CEER Extended Error Report 15 TAT+CCLK Set Clock and Date AT+CFUN=? 17 AT+CFUN Set Phone FunctionalityAT+CFUN? AT+CIND=? 18 AT+CIND Indicator ControlAT+CIND? 19 AT+CLAC List all available AT Commands 20 AT+CMEE Mobile Equipment Error AT+CMER=? 21 AT+CMER Mobile Equipment Event ReportingAT+CMER? 22 AT+CPAS Phone Activity Status AT+CPAS=? 23 AT+CPIN PIN Control SIM PUK2 PH-SIM PINSIM PIN2 Blocked 24 AT+CPWD Change Password AT+CPWD=? GM29 INTEGRATOR’S Manual 25 AT+CR Service Reporting Control 26 AT+CRC Cellular Result Code 27 AT+CSAS Save Settings AT+CSAS=? AT+CSQ=? 28 AT+CSQ Signal StrengthAT+CSQ AT+CTZU=? 29 AT+CTZU Automatic Time Zone UpdateAT+CTZU? AT*E2EAMS? AudioAT*E2EAMS Ericsson M2M Audio Profile Modification AT*E2EAMS=? Audio diagram of the Codec Configure current profile pr1 to pr21 Mute OFF AT*E2EAMS=255 AT*E2APR? AT*E2APR= ErrorAT*E2APR M2M Audio Profile Manipulation AT*E2APR=? AT*E2APR=? ATMS,AFMS AT*EALREricsson Audio Line Request AT*EALR? Ealr AT*EAMS? Ericsson Audio Mode SelectionAT*EAMS AT*EAMS=? AT*EARS? Ericsson Audio Ring SignalAT*EARS AT*EARS=? AT*ELAM Ericsson Local Audio ModeEricsson Microphone Mode AT*EMIC AT*EXVC AT*EMIREricsson Music Mute Indication Request That is no clipping occurs. An external accessory AT+CBST Select Bearer Service TypeData CSD/HSCSD AT+CBST? Name Description AT+CRLP? AT+CRLPRadio Link Protocol +CRLP Acknowledgment timer T1 *10ms +CGACT? Data GprsAT+CGACT PDP Context Activate or Deactivate +CGACT=? +CGATT=? AT+CGATT Gprs Attach or Detach+CGATT? AT+CGDATA Enter Data State +CGDATA=? CRLF+CGDCONT AT+CGDCONT Define PDP Context+CGDCONT? +CGDCONT=? APN +CGEREP=? AT+CGEREP Gprs Event Reporting+CGEREP? CRLF+CGPAD AT+CGPADDR Show PDP Address+CGPADDR +CGPADDR=? +CGQMIN=? AT+CGQMIN Quality of Service Profile Minimum Acceptable+CGQMIN? 117 +CGQREQ=? AT+CGQREQ Quality of Service Profile Requested+CGQREQ? 119 GM29 INTEGRATOR’S Manual AT+CGREG=? AT+CGREG Gprs Network Registration StatusAT+CGREG? +CGSMS=? 10 AT+CGSMS Select Service for MO SMS Messages+CGSMS? Hscsd Current Call Parameters Data HscsdAT+CHSC AT+CHSC AT+CHSD AT+CHSDHscsd Device Parameters AT+CHSD=? AT+CHSN? Hscsd Non Transparent Call ConfigurationAT+CHSN AT+CHSN=? AT+CHSR? AT+CHSRHscsd Parameters Report AT+CHSR=? AT+CHSU? AT+CHSUHscsd Automatic User Initiated Upgrading AT+CHSU=? 128 AT*E2FAX? FaxAT*E2FAX Ericsson M2M Fax Comm. Baud Rate Modification AT*E2FAX=? Low Level Fax Commands Identification AT&F Set to Factory Defined ConfigurationAT&F Error AT&W Store User Profile Read MS Manufacturer Identification List all Supported AT CommandsAT+CGMI AT+CGMM AT+CGSN AT+CGMRRead MS Revision Identification Read MS Product Serial Number Identification 10 AT+GCAP Request Modem Capabilities List AT&C DTE ErrorInterface 10.3 AT&D Circuit 108 DTR Response 10.5 AT+WS46 Mode Selection 10.4 AT&S Circuit 107 DSR Response 10.6 ATE Command Echo 10.7 ATV DCE Response Format 10.8 ATZ Reset to Default Configuration AT+CMUX=? 10.9 AT+CMUX Switch to 07.10 Multiplex ProtocolAT+CMUX? 140 AT+CRES=? 10.10 AT+CRES Restore SMS Settings10.11 AT+ICF Cable Interface Character Format AT+ICF? AT+IFC=? 10.12 AT+IFC DTE-DCE Local Flow ControlAT+IFC? 10.14 AT+IPR Cable Interface Port Command 10.13 AT+ILRR Cable Interface Local Rate Reporting AT*E2ESC=? 10.15 AT*E2ESC M2M Escape Sequence Guard TimeAT*E2ESC? AT*E2CD? Network11.1 AT*E2CD Ericsson M2M Cell Description AT*E2CD=? According to GSM 04.18 V8.6.0, the coding of the timing 11.2 AT*E2EMM Ericsson M2M Engineering Monitoring Mode AT*E2EMM=1 AT*E2EMM=7 Responses. Default value is 151 152 11.3 AT*E2SPN M2M Service Provider Indication 11.4 AT*EALS Ericsson Request ALS Status AT*ECSP=? 11.5 AT*ECSP Ericsson Customer Service ProfileSIM 11.6 AT*EPNR Ericsson Read SIM Preferred Network AT*EPNR=? 11.7 AT*EPNW 11.8 AT*E2SSN Ericsson M2M SIM Serial Number AT*ESLN=? 11.9 AT*ESLN Ericsson Set Line NameAT*ESLN? Esln 11.10 AT+CIMI Subscriber Identification 11.11 AT+CLCK +CPWD LF+CNUM 11.12 AT+CNUM Subscriber NumberAT+CNUM AT+CNUM=? AT+COLP? 11.13 AT+COLP Connected Line Identification PresentationUDI AT+COLP=? Disable AT+COPS=? 11.14 AT+COPS Operator SelectionAT+COPS? AT+CREG=? 11.15 AT+CREG Network RegistrationAT+CREG? AT*ECPI=? 11.16 AT*ECPI Ciphering IndicatorAT*ECPI? 166 AT*E2NBTS=? 11.17 AT*E2NBTS Ericsson M2M Neighbour BTSAT*E2NBTS? 168 12.2 AT*ESAG Ericsson Add to Group Phonebook12.1 AT*E2PBCS Ericsson M2M Phonebook Check Sum 12.3 AT*ESCG Ericsson Create Group AT*ESCG=? 12.4 AT*ESCN AT*ESCN=? 172 AT*ESDI=? 12.5 AT*ESDG Ericsson Delete Group12.6 AT*ESDI Ericsson Delete Group Item AT*ESGR 12.7 AT*ESGR Ericsson Group Read12.8 AT*EGIR Ericsson Group Item Read AT*ESGR=? 12.9 AT*ESNU Ericsson Settings Number AT*ESNU? +CPBF=? 12.10 AT+CPBF Phonebook Find12.11 AT+CPBR Phonebook Read +CPBR=? Nlength Description AT+CPBS=? 12.12 AT+CPBS Phone StorageAT+CPBS? 12.13 AT+CPBW Phonebook Write AT+CPBW=? Tlength Description 13.1 AT+CPIN PIN Control Short Message Services Point to Point13.2 AT+CGSMS Select Service for MO SMS Messages 13.3 AT+CPMS Preferred Message Storage 182 AT+CSCA=? 13.4 AT+CSCA Service Centre AddressAT+CSCA? AT+CMGF? 13.5 AT+CMGF Message Format13.6 AT+CMGW Write Message to Memory AT+CMGF=? Text Mode ESC 186 AT+CMGS=? ESC Error13.7 AT+CMGS Send Message 188 AT+CMGF=1 AT+CSDH=1 13.8 AT+CMSS Send From Storage AT+CMSS=? AT+CMGC=? 13.9 AT+CMGC Send Command+CMGC Text is entered ctrl-Z/ESC By toda AT+CNMI=? 13.10 AT+CNMI New Message Indications to TEAT+CNMI? No SMS-DELIVER indications are routed to the TE 196 +CBM AT+CMGR=? 13.11 AT+CMGR Read MessageAT+CMGR= +CMGR Successful and CBM storage 200 201 Compressed text not supported AT+CMGL=? 13.12 AT+CMGL List Message+CMGL 204 AT+CMGL DELIVERs 206 207 208 AT+CMGD=? 13.14 AT+CSDH Show Text Mode Parameters13.13 AT+CMGD Delete Message AT+CSDH? AT+CSMP=? 13.15 AT+CSMP Set Text Mode ParametersAT+CSMP? AT+CSCS=? 13.16 AT+CSCS Select Character SetAT+CSCS? IRA AT+CSMS? 13.17 AT+CSMS Select Message Service+CSMS AT+CSMS=? Short Message Services Point to Point 214 14.2 AT+CSCB Select Cell Broadcast Message Type Short Message Services Cell Broadcast14.1 AT+CNMI New Message Indications to TE AT+CSCB? 216 STK SIM Application ToolkitAT*E2STKS AT*E2STKD=? Display Text Error15.3 AT*E2STKD M2M STK Display Text AT*E2STKG=? 15.4 AT*E2STKG M2M STK Get InkeyGET Inkey 220 AT*E2STKI=? 15.5 AT*E2STKI M2M STK Get InputInput Answer Description 223 AT*E2STKL=? Select Item Error15.6 AT*E2STKL M2M STK Select Item Maximum length is fixed AT*E2STKM=? 15.7 AT*E2STKM M2M STK Set Up MenuUP Menu Error GSM default alphabet 15.8 AT*E2STKN M2M STK Envelope Menu Selection 15.9 AT*E2STKC M2M STK Set Up CallCall Error AT*E2STKN=? User 15.10 *E2STKE STK Send Short Message Sending an SMS 15.11 *E2STKP STK Send SS 15.12 *E2STKU STK Send Ussd 15.14 AT*E2STKTO SIM Application Toolkit Settings 15.13 *E2STKR STK Refresh Unsolicited result code *E2STKTO command 16.2 AT+CACM Accumulated Call Meter Supplementary Services16.1 AT+CPIN PIN Control AT+CAMM=? 16.3 AT+CAMM Accumulated Call Meter MaximumAT+CAMM? AT+CAOC=? 16.4 AT+CAOC Advice of ChargeAT+CAOC? AT+CPUC=? 16.5 AT+CPUC Price Per Unit and Currency TableAT+CPUC? SEK AT*EDIF? 16.6 AT*EDIF Ericsson Divert FunctionEdif AT*EDIF=? AT*EIPS? 16.7 AT*EIPS Identity Presentation SetAT*EIPS=ID AT*EIPS=? AT*ELIN? 16.9 AT*E2SSD M2M Supplementary Service Dispatch16.8 AT*ELIN Ericsson Line Set AT*ELIN=? 16.10 AT*E2SSI M2M Supplementary Service Indications Ssinumbererr SsisimerrorSsinetworkproblem Ssicallbarred Bsallpadaccesscaservices BearerserviceTeleservice Multiparty Tsallteleservicesexceptsms BsallsynchronousservicesTsalldataservices BS12KBITUNRESTRICTEDDIGITAL Ssstatusprovisioned TemporarydefaultrestrictedTemporarydefaultallowed Ssstatuspra AT+CCFC=? 16.11 AT+CCFC Call Forwarding number and Conditions+CCFC Default value if ‘+’ is in sca AT+CCWA=? 16.12 AT+CCWA Call WaitingAT+CCWA? Unsolicited Result Codes +CCWA number, type, class 16.13 AT+CHLD Call Hold and Multiparty AT+CHLD=? AT+CLIP=? 16.14 AT+CLIP Call Line Identification PresentationAT+CLIP? Description Command Possible Responses 16.15 AT+CLIR Calling Line Identification Restriction Presentation indicator is used according to AT+CSSN=? 16.16 AT+CSSN Supplementary Service NotificationAT+CSSN? Enable the +CSSU result code presentation status in the TA AT+CUSD=? 16.17 AT+CUSD Unstructured Supplementary Service DataAT+CUSD? Different alternatives are shown below +CUSD0 OK +CUSD0,ALARM 260 Alphabetical Listing of AT Commands AT*EARS AT*EALRAT*EAMS AT*ECAM AT+CFUN AT+CCLKAT+CCWA AT+CGACT AT+CMGF AT+CMGCAT+CMGD AT+CMGR AT+CSSN AT+CSMPAT+CSMS AT+CTZU ATZ ATVATX E2STKE