6. DATA - GPRS
The set command specifies a profile for the context identified by the (local) context identification parameter, <cid>. Since this is the same parameter that is used in the +CGDCONT command, the +CGQREQ command is effectively an extension to the +CGDCONT command.
The QoS profile consists of a number of parameters, each of which may be set to a separate value.
A special form of the set command, +CGQREQ= <cid> causes the requested profile for context number <cid> to become undefined.
<cid> | Description |
|
|
Integer type | Parameter which specifies a particular PDP context |
| definition |
|
|
<precedence> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
1 | High priority |
|
|
2 | Normal priority |
|
|
3 | Low priority |
|
|
|
|
<delay> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
Delay class | |
|
|
|
|
<reliability> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
Reliability class | |
|
|
|
|
<peak> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
1 | Up to 1000 (8kbits/s) |
|
|
2 | Up to 2000 (16kbits/s) |
|
|
3 | Up to 4000 (32kbits/s) |
|
|
4 | Up to 8000 (64kbits/s) |
|
|
5 | Up to 16000 (128kbits/s) |
|
|
6 | Up to 32000 (256kbits/s) |
|
|
7 | Up to 64000 (512kbits/s) |
|
|
8 | Up to 128000 (1024kbits/s) |
|
|
9 | Up to 256000 (2048kbits/s) |
|
|
119
LZT 123 7361 R1A
