Standard Horizon GM29 manual 22 AT+CPAS Phone Activity Status, At+Cpas=?

GM29 INTEGRATOR’S MANUAL

3.22 AT+CPAS	Phone Activity Status
	Description	Command	Possible Responses
	Execute Phone Activity	AT+CPAS[=<mode>]	•	+CPAS: <pas>
	Status		•	+CME ERROR <err>
			• OK
			• ERROR
	Test if the command is	AT+CPAS=?	•	+CPAS:
	supported			(list of supported
				<pas>s)

• +CME ERROR <err>

• OK

• ERROR

Returns the activity status <pas> of the ME. It can be used to interrogate the ME before requesting action from the phone.

When the command is executed without the <mode> argument, the command returns <pas>-values from 0 to 128 (for supported values se table 1 below). When, on the other hand, the command is executed with the <mode> argument set to 1, the command may return Ericsson specific <pas> values from 129 to 255 (for supported values see the table below).

Test command returns values supported by the ME as a compound value: refer to GSM 07.07.

<pas>	Description
0	Ready (ME allows commands from TA/TE)
3	Ringing (ME is ready for commands from TA/TE, but the
	ringer is active)
4	Call in progress (ME is ready for commands from TA/TE, but
	a call is in progress)

129In idle state, (operator name/clock/date). This state is a sub-state to ‘ready’ (0) and has the following definition: In Idle state, that is, operator, clock and date (is set) shown on the display

No conversation or data call in progress No sub-menus shown on the display

4 Only digits, clear, *, NO and # allowed in this mode, not changing mode

130Mobile oriented call in progress. This is a sub-state to ‘call in progress’

131Mobile terminated call in progress. This is a sub-state to ‘call in progress’

<mode>	Description
1	Allows the CPAS to return Ericsson specific <pas> values,
	such as 129, 130 and 131

82

LZT 123 7361 R1A