Standard Horizon GM29 manual AT+CGDCONT Define PDP Context, +Cgdcont?, Crlf+Cgdcont, +Cgdcont=?

GM29 INTEGRATOR’S MANUAL

6.4 AT+CGDCONT Define PDP Context

Description	Command	Possible Responses
Select PDP	+CGDCONT=[<cid>	• +CME ERROR: <err>
context	[,<PDP_type> [,<APN>	• OK
parameters	[,<PDP_addr>	• ERROR
	[,<d_comp>
	[,<h_comp> [,<pd1>
	[,…[,pdN]]]]]]]]]
Read the	+CGDCONT?	• +CGDCONT: <cid>,
command		<PDP_type>,<APN>,
		<PDP_addr>,<d_comp>,
		<h_comp>[,<pd1>[,…[,pdN]]]
		[<CR><LF>+CGDCONT:
		<cid>, <PDP_type>,<APN>,
		<PDP_addr>,<d_comp>,
		<h_comp>[,<pd1>[,…[,pdN]]]
		[...]]
		• OK
		• ERROR
Test if the	+CGDCONT=?	• +CGDCONT: (range of
command is		supported <cid>s),
supported		<PDP_type>,,,(list of
		supported <d_comp>s),
		(list of supported <h_comp>s)
		[,(list of supported <pd1>s)
		[,…[,(list of supported
		<pdN>s)]]]
		[<CR><LF>+CGDCONT:
		(range of supported <cid>s),
		<PDP_type>,,,(list of
		supported <d_comp>s),
		(list of supported <h_comp>s)
		[,(list of supported
		<pd1>s)[,…[,(list of supported
		<pdN>s)]]] [...]]
		• OK
		• ERROR

Specifies PDP context parameter values for a PDP context identified by the (local) context identification parameter, <cid>.

<cid>	Description
Integer type	(PDP Context Identifier) a numeric parameter which
	specifies a particular PDP context definition. The
	parameter is local to the TE-MS interface and is used in
	other PDP context-related commands. The range of
	permitted values (minimum value = 1) is returned by the
	test form of the command
1-10	Supported values. Ericsson specific
<PDP_type>	Description
IP	Internet Protocol (IETF STD 5)

112

LZT 123 7361 R1A