
15. SIM Application Toolkit
15.1 | AT+CPIN | PIN Control |
|
| See 3.23, AT+CPIN PIN Control |
15.2 | AT*E2STKS | SIM Application Toolkit Settings |
Description | Command | Possible responses | |
|
|
|
|
Set the presentation of | AT*E2STKS=<on_off> | • | +CME ERROR <err> |
the unsolicited result |
| • | OK |
codes corresponding to |
| • ERROR | |
STK |
| ||
|
|
| |
|
|
|
|
Read the current status of AT*E2STKS? the presentation of the
unsolicited result codes
•*E2STKS: <on_off>
•+CME ERROR <err>
•OK
•ERROR
Test if the command is | AT*E2STKS=? | • | *E2STKD: list of |
supported |
|
| supported <on_off> |
|
| • +CME ERROR <err> | |
|
| • OK | |
|
| • | ERROR |
|
|
|
|
Allows the external application to disable or enable the presentation of the unsolicited result codes corresponding to the STK commands. Parameter <on_off> is used to disable or enable the presentation of an unsolicited result code *E2STK. Setting chosen is stored internally so that it is not necessary to change it each time the ME is switched on.
If the presentation of the unsolicited result codes is disabled, the messages below are not sent to the application.
The unsolicited result codes shall be disabled by default.
<on_off> | Description |
|
|
0 | Disable the presentation of the unsolicited result codes |
| related to STK. Default value |
1 | Enable the presentation of the unsolicited result codes |
| related to STK |
|
|
Unsolicited Result Codes:
The unsolicited result codes defined in sections below can be received.
217
LZT 123 7361 R1A