Standard Horizon GM29 manual 18 AT+CIND Indicator Control, At+Cind?, At+Cind=?

3. CONTROL AND STATUS

3.18 AT+CIND	Indicator Control
	Description	Command	Possible Responses
	Set Indicator	AT+CIND=[<ind>	•	+CME ERROR: <err>
	Control	[,<ind>[,…]]]	•	OK
			• ERROR
	Read the current	AT+CIND?	•	+CIND: <ind>,<ind>,…
	setting		•	+CME ERROR: <err>
			• OK
			• ERROR
	Test if the	AT+CIND=?	•	+CIND: (<descr>,(list of
	command is			supported <ind>s)),
	supported			(<descr>,(list of supported
				<ind>s)),…
			•	+CME ERROR: <err>
			• OK
			• ERROR

Used to set the values of ME indicators. <ind> value 0 means that the indicator is off (or in state which can be identified as “off” state), 1 means that indicator is on (or in a state which is more substantial than “off” state), 2 is more substantial than 1, and so on. If the indicator is a simple on/off style element, it has values 0 and 1. The number of elements is ME specific. If the ME does not allow setting of indicators or it is not currently reachable, +CME ERROR: <err> is returned. If a certain indicator is not writable, it cannot be set. If the parameter is an empty field, the indicator will keep the previous value.

Test command returns pairs, where string value <descr> is a maximum 16 character description of the indicator and compound value is the allowed values for the indicator. If ME is not currently reachable, +CME ERROR: <err> is returned (refer to GSM 07.07).

<ind>	Description
Integer type	Value shall be in range of corresponding <descr>
<descr>	Description
“signal”	Signal quality (0-5)
“service”	Service availability (0-1)
“sounder”	Sounder activity (0-1)
“message”	Message received (0-1)
“call”	Call in progress (0-1)
“roam”	Roaming indicator (0-1)
“sms full”	A short message memory storage in the MT has become full
	(1), or memory locations are available (0); i.e. the range is
	(0-1)
	79

LZT 123 7361 R1A