2. CALL CONTROL
transmitted during the first 125 milliseconds after transmission of the termination character are ignored. This is to allow the DTE to append additional control characters such as line feed after the command line termination character.
<dial_string> Description
“0 1 2 3 4 5 6 7 Valid characters for origination 8 9 * # +”
WThe W modifier is ignored but is included only for compatibility purposes
, | The comma modifier is ignored but is included only for |
| compatibility purposes |
|
|
T | The T modifier is ignored but is included only for |
| compatibility purposes |
|
|
P | The P modifier is ignored but is included only for |
| compatibility purposes |
|
|
<Final Result | Description |
Code> |
|
|
|
CONNECT | If connection is successfully established, only valid for data |
| connections |
CONNECT | If connection is successfully established, only valid for data |
<text> | connections |
|
|
NO CARRIER | Unable to establish a connection or the connection |
| attempt was aborted by the user |
ERROR | An unexpected error occurred while trying to establish the |
| connection |
|
|
NO DIALTONE | The mobile phone is being used for a voice call or is not |
| within coverage of the network |
BUSY | The phone number called is engaged, valid for data and |
| voice connections |
|
|
OK | Only valid for voice connections |
|
|
|
|
<text> | Description |
|
|
19200 | Connected with data bit rate of 19200 bits/s (HSCSD) |
|
|
9600 | Connected with data bit rate of 9600 bits/s |
|
|
4800 | Connected with data bit rate of 4800 bits/s |
|
|
2400 | Connected with data bit rate of 2400 bits/s |
|
|
63
LZT 123 7361 R1A
