Standard Horizon GM29 ATH Hang up, ATO Return to Online Data Mode, ATP Select Pulse Dialling

GM29 INTEGRATOR’S MANUAL

2.4 ATH	Hang up
	Description	Command	Possible Responses
	Terminate the call	ATH	• ERROR
			• OK

Signals the MS to terminate an active call.

2.5 ATO	Return to Online Data Mode
	Description		Command	Possible Responses
	Return to on-line data		ATO[<value>]	• CONNECT
	mode			• CONNECT <text>
				• NO CARRIER
				• ERROR
	Switch to the on-line data mode from the on-line command mode during
	an active call. Returns ERROR when not in on-line command mode.
	<value>	Description
	0	Return to on-line data state from on-line command
2.6 ATP	Select Pulse Dialling
	Description		Command	Possible Responses
	Select pulse dialling		ATP	OK
	Show if the command		ATP=?	OK
	is supported?

Command is ignored, and is implemented for compatibility only. It would normally cause the next D command to use pulses when dialling the number.

2.7 ATT	Select Tone Dialling
	Description	Command	Possible Responses
	Select tone dialling	ATT	OK
	Show if the command	ATT=?	OK
	is supported?

Command is ignored, and is implemented for compatibility only. It would normally cause the next D command to use tones when dialling the number.

64

LZT 123 7361 R1A