Standard Horizon GM29 manual 13.9 AT+CMGC Send Command, At+Cmgc=?

13. SHORT MESSAGE SERVICES - POINT TO POINT

supports, <scts> is returned. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command is abortable.

	<index>	Description
	Integer type	Value in the range of location numbers supported by the
		associated memory
	<da>	Description
	String type	GSM 03.40 TP-Destination-Address Value in string format;
		BCD numbers (or GSM default alphabet characters) are
		converted to characters of the currently selected TE
		character (refer command +CSCS). Type of address given
		by <toda>
	<toda>	Description
	String type	GSM 04.11 TP-Destination- Address Type-of-Address octet
		in integer format (when first character of <da> is +(IRA 43)
		default is 145, otherwise default is 129
	<scts>	Description
	String type	GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
		format (refer <dt>)
	<mr>	Description
	Integer type	GSM 03.40 TP-Message-Reference in integer format
13.9 AT+CMGC	Send Command
PDU Mode
	Description	Command	Possible Responses
	Send command	AT+CMGC=<length><CR>	• if PDU mode
	message	<pdu><ctrl-Z/ESC>	(+CMGF=0) and
			sending successful:
			+CMGC:
			<mr>[,<ackpdu>]
			• if sending fails:
			+CMS ERROR: <err>
			• OK
			• ERROR
	Show if the	AT+CMGC=?	• OK
	command is		• ERROR
	supported

Sends a command message from a TE to the network (SMS- COMMAND). The entering of PDU is as specified in the send message command, +CMGS. Message reference value <mr> is returned to the

191

LZT 123 7361 R1A