Standard Horizon GM29 manual ATS5 Command Line Editing Character Backspace, ATS5?, ATS6?

GM29 INTEGRATOR’S MANUAL

3.6 ATS5	Command Line Editing Character (BACKSPACE)
	Description		Command	Possible Responses
	Request Command		ATS5=<value>	• OK
	Line Editing Character			• ERROR
	Shows the current		ATS5?	<value>
	setting
	Show if the command		ATS5=?	S5: (list of supported
	is supported			<value>s)
	This S-parameter represents the decimal IA5 value of the character
	recognised by the DCE as a request to delete from the command line the
	immediately preceding character.
	<value>	Description
	8	Line editing character. Default value
	0 to 127	Line editing character
3.7 ATS6	Blind Dial Delay Control
	Description		Command	Possible Responses
	Blind dial delay control		ATS6=[<dly>]	OK
	Read the current		ATS6?	<dly>
	setting
	Show if the command		ATS6=?	S6: (list of supported
	is supported			<dly>s)

Included for compatibility. No functionality

<dly> Description

2 Wait two seconds before blind dialling. Default value

2-255 Number of seconds to wait before blind dialling

72

LZT 123 7361 R1A