Standard Horizon GM29 manual 10.10 AT+CRES Restore SMS Settings, At+Cres=?, At+Icf?, At+Icf=?

10. INTERFACE

10.10 AT+CRES	Restore SMS Settings
	Description		Command	Possible Responses
	Restore settings		AT+CRES[=<profile>]	•	+CMS ERROR: <err>
				• OK
				• ERROR
	Get available profiles		AT+CRES=?	•	+CRES: (list of
					supported
					<profile>s)
				•	+CMS ERROR: <err>
				• OK
				• ERROR
	Restores message service settings from non-volatile memory to active
	memory. A TA can contain several profiles of settings. Settings
	specified in commands Service Centre Address +CSCA, Set Message
	Parameters +CSMP and Select Cell Broadcast Message Types +CSCB
	(if implemented) are restored. Certain settings, such as SIM SMS
	parameters, cannot be restored.
	<profile>	Description
	0..2	Profile number where settings are to be stored. Default
		value is 0
10.11 AT+ICF	Cable Interface Character Format
	Description		Command	Possible Responses
	Defines DTE-DCE		AT+ICF=[format[,parity]]	•	OK
	character framing			•	ERROR
	Read the current		AT+ICF?	•	+ICF:
	setting				<format>,<parity>
				• OK
				• ERROR
	Show if the		AT+ICF=?	•	+ICF: (list of
	command is				supported
	supported				<format>s), (list of
					supported <parity>s)
				• OK
				• ERROR
	This extended-format compound parameter is used to determine the
	local serial port start-stop (asynchronous) character framing used by the
	DCE to accept DTE commands, and while transmitting information text
	and result code, if this is not automatically determined; (Not
	supported) +IPR=0 forces +ICF=0 (see +IPR).
	<format>	Description
	3	8 Data 1 Stop. Default value
					141

LZT 123 7361 R1A