Standard Horizon GM29 manual Control and Status, ATQ Result Code Suppression

3. Control and Status

3.1 ATQ	Result Code Suppression
	Description	Command	Possible Responses
	Set Result Code	ATQ[=]<value>	•	OK
	Suppression		•	ERROR
	Read the current	ATQ?	Q: <value>
	setting
	Show if the command	ATQ=?	Q: (list of supported
	is supported		<value>s)

Determines whether or not the DCE transmits result codes to the DTE. When result codes are being suppressed, no portion of any intermediate, final, or unsolicited result code - header, result text, line terminator, or trailer - is transmitted.

<value> Description

0DCE transmits result codes. Default value

1Result codes are suppressed and not transmitted

3.2 ATS0	Automatic Answer Control
	Description	Command	Possible Responses
	Automatic answer	ATS0=[<rcnt>]	•	OK
	control		•	ERROR
	Read the current	ATS0?	<rcnt>
	setting
	Show if the command	ATS0=?	S0: (list of supported
	is supported		<rcnt>s)

Defines the automatic answering feature of the modem. A non-zero value specifies the number of rings before the call is answered.

Note! Call is always answered in the current fax class, regardless of whether the incoming call is voice, data, or fax.

<rcnt>	Description
0	Disable automatic answer. Default value
1-7	Answer after the specified number of rings

69

LZT 123 7361 R1A