Standard Horizon GM29 manual 23 AT+CPIN PIN Control

3. CONTROL AND STATUS

3.23 AT+CPIN	PIN Control
	Description	Command	Possible Responses
	Request PIN Control	AT+CPIN=<pin>[,<new	•	+CME ERROR:
		pin>]		<err>
			• OK
			• ERROR
	Show the current	AT+CPIN?	•	+CPIN: <code>
	setting		•	+CME ERROR:
				<err>
			• OK
			• ERROR
	Show if the command	AT+CPIN=?	• +CME ERROR:
	is supported			<err>
			•	+CPIN: (supported
				<code>s)

• OK

• ERROR

Sends the password to the ME, which is necessary to make the ME operational (SIM PIN, SIM PUK or PH-SIM). If the PIN is to be entered twice, the TA autonomously repeats the PIN. If no PIN request is pending, no action is taken towards the ME and an error message (+CME ERROR <err>) is returned to the TE.

If the PIN required is PUK, the second pin is required. This second PIN, <newpin>, is used to replace the old PIN in the SIM.

Note! Commands which interact with the ME that are accepted when the ME has a pending request for SIM PIN, SIM PUK or PH-SIM are: +CGMI, +CGMM, +CGMR, +CGSN, +CFUN, +CMEE +CPIN, L and M.

<pin>,<newpin>	Description
string	The range for the SIM PIN and the PH- SIM PIN is 4 - 8
	digits. The SIM PUK consists of 8 digits
<code>	Description
READY	ME is not pending for any password
SIM PIN	ME is waiting SIM PIN to be given
SIM PUK	ME is waiting SIM PUK to be given

83

LZT 123 7361 R1A